| |
|
|
|
|
|
| |
 DOUBLE SPINDLE SYSTEM |
| One head with two different spindles of your choice. One for drilling and one for routing is the most common combination. |
|
| GEMINI SYSTEM |
| Two indipendent heads working simultaneously on the same panel. Very efficient for step and repeat jobs. |
|
| X-RAY TECHNOLOGY |
| X-Ray image acquisistion and processing technology used to detect innerlayers targets and computate an offset or a measure. |
|
| LINEAR MOTORS XYZ |
| Linear motor drives are used on all axes to grand speed, accuracy and low maintenance costs. |
|
|
| |
|
|
|
|
|
| |
| CONTACT BIT DETECTION |
| Thanks to the contact type any bit breakage or chipping is detected in real time. |
|
| CONTROLLED DEPTH DRILLING / ROUTING |
| For perfect depth controlled drilling and routing we use the surface contact detection type technology or the additional linear scale or both! |
|
| PANEL THICKNESS MEASUREMENT SYSTEM |
| Measure the panel thickness every time you need where you need. |
|
| PLURITEC PCBCONTROL |
| Our extremely fast CNC with multiprocessing function is able to manage up to 32 axes. The software is developed in house and can be remote controlled. |
|
|
| |
|
|
|
|
|
| |
| SURFACE MAPPING DRILLING / ROUTING PROCESS |
Extremely high accuracy in blind via formation and depth controlled drilling and routing thanks to surface data acquisition and interpolation.
|
|
| FLIP DRILLING PROCESS |
| When the drill bit flute length does not allow drilling through holes. Drill one panel side first reverse (FLIP) and complete the drilling. Two or more references are used for the “Flip drill system”. Requires CCD or X-Ray. |
|
| CCD CAMERA REGISTRATION SYSTEM |
| Automatic panel to table alignment and offset compensation via vision system. Is possibile a specific panel’s section alignment and offsets to specific local target. |
|
| ONE STEP X-RAY DRILLING AND ROUTING PROCESS |
| X-Ray Technology used to detect inner layer offset and automatically drill or rout a complete job without moving the panel. |
|
|
| |
|
|
|
|
|
| |
| AUTOMATIC BUSH CHANGE |
| Change the bush diameter improving micro drilling accuracy and reducing bit breaking. |
|
| INDEPENDENT TOOL CHANGE |
| Tool change that operates indipendently from the machine table improving cycle time. |
|
| BELT TOOL HOLDER |
| Large capacity bits holder can be indipendently operated when the machine is working. |
|
| AUTOMATION SYSTEM |
| The machine will automatically load and unload the panel. Several system are available depending from the machine model. |
|
|
| |
|
|
|
|
|
| |
| THIN PANELS PROCESSING SYSTEM |
| Grant thin panel or core layer correct processing improving flatness and rigidity of the panel automaticcaly placing entry material before processing. |
|
| TABLE CLAMPS SYSTEM |
| Panel is clamped to the table via mushrooms. |
|
| POP UP SYSTEM |
| Automatically disengage pins from routed panels. |
|
| BAR CODE SYSTEM |
| The machine scans the panel and read via a bar code reader the job number stamped automatically loading the file into the system and starting production. |
|
|
| |
|
|
|
|
|
